IP Core, Source Code (VHDL)
Xilinx Artix-7™, Kintex-7™, Zynq-7000™ SoC, Kintex UltraScale™, Kintex UltraScale+™, Zynq UltraScale+™ MPSoC
|Target Device Type||
Sony SLVS-EC v1.2
The SLVS-EC RX IP Core reduces overhead and complexity implementing a SONY imager with SLVS-EC. As on-chip function block connecting the customer’s FPGA logic with the image sensor’s data stream, the IP Core receives the interface data, manages the byte-to-pixel conversion for various lane configurations and thus prepares a highly-efficient processing workflow run on the FPGA. The FRAMOS software supports SLVS-EC v1.2 with 1, 2, 4, 8 lanes configurable by the user and delivers pixels formats from 8 to 14-bit of raw data. By de-risking the sensor implementation it significantly reduces the development efforts and accelerates the time to market.
Supported Standard and Features:
|Compatible Standards||SLVS-EC v1.2, v2.0|
|Lanes Supported||1, 2, 4, 8 (configurable by user)|
|Baud Grade(s)||: 1.2 Gbps, : 2.5 Gbps, : 5 Gbps|
|Pixel Format(s)||8, 10, 12, 14, 16 bits per pixel (RAW) (Dynamic mode change)|
|CRC / ECC||Supported (Configurable)|
The IP Core is available for the following devices:
An appropriate Evaluation Kit is available separately. Compatibility to further devices on request.