Diese Website benutzt Cookies, die für den technischen Betrieb der Website erforderlich sind und stets gesetzt werden. Andere Cookies, die den Komfort bei Benutzung dieser Website erhöhen, der Direktwerbung dienen oder die Interaktion mit anderen Websites und sozialen Netzwerken vereinfachen sollen, werden nur mit Ihrer Zustimmung gesetzt.
Описание товара "CA378-AOIS w. I/F Board for RaspberryPi3"
The CA378-AOIS sensor module is a Sony IMX378 based module that includes an integrated lens that provides optical image stabilization (OIS). The 12.3 MP sensor used on this module provides PDAF information that can be used to control the voice coil module (VCM) that is embedded in the lens mount. Image data and command/control is provided through a MIPI CSI-2 interface. A NVIDIA Tegra TX2 interface board and Linux based camera drivers are available allow the CA379-AOIS to connect to the TX2 development board. This product is ideal for applications looking for a small sensor module with Tegra TX2 support right out of the box. This kit includes an interface board for the Raspberry PI3 Model B with a 160mm flex cable that allows the CA378-AOIS module to be connected directly to the Raspberry PI3 (not included). The interface board is connected to the Raspberry PI3 with the flex cable provided.
Ссылки на другие веб-сайты "CA378-AOIS w. I/F Board for RaspberryPi3"
Информация о продукте "CA378-AOIS w. I/F Board for RaspberryPi3"
Sensor technology:
CMOS
Aperture:
2
Bit depths:
10
FOV diagonal [°]:
81.1
FOV vertical [°]:
54.3
FOV horizontal [°]:
68.8
Sensor name:
IMX378
Image stabiliszation:
yes
Sensor Size [inch]:
1/2.3 inch
Focal length [mm]:
4.52
Shutter type:
Rolling shutter
Pixel size [µm]:
1.55
Vertical resolution:
3040
Horizontal resolution:
4056
Resolution [MP]:
12.33
Camera Interface:
MIPI
Manufacturer:
CenturyArks
Sensor manufacturer:
Sony
Frame rate [fps]:
60
Specification:
includes: CA378-AOIS, an interface board for the Raspberry PI3 Model B, a 160mm flex cable that allows the CA378-AOIS module to be connected directly to the Raspberry PI3 (not included)
